Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-18-2015, 04:44 PM
Registered User
 
Join Date: Apr 2014
Posts: 4
1999 W210 Mercedes-Benz E320 4Matic rolls all windows and moonroof down by itself

I have replaced the PSE under the rear seat but the car will still roll down all the windows and open the moonroof/sunroof as soon as I exit the car. The door lock pins will also go up and down while driving. I have already tinkered with the door switches and those are not the issue. I have been searching for about a year trying to track down anybody who has had this issue and successfully resolved it but have found nothing in the forums. Does anybody have experience with this?
Reply With Quote
  #2  
Old 02-18-2015, 05:20 PM
Registered User
 
Join Date: Nov 2010
Location: TX
Posts: 3,380
This system is controlled by the IR sensor on the door handle outside, if you press the lock or unlock on the smart key while aimed at that sensor - it will rolldown or rollup all windows and sunroof.

Try doing that from outside the car - the sensor is on the door handle near the keyhole.

Also make sure there is no damage to the wiring passing into the front door itself.
__________________
2012 BMW X5 (Beef + Granite suspension model)

1995 E300D - The original humming machine (consumed by Flood 2017)
2000 E320 - The evolution (consumed by flood 2017)
Reply With Quote
  #3  
Old 02-19-2015, 12:46 PM
Registered User
 
Join Date: Dec 2007
Location: Houston, Texas
Posts: 1,143
Sounds like your wiring to the PSE is crossed, touching or contaminated. As Zulfigar mentions above, the symptom you describe is normally the effect of holding your smart key's unlock button to send an Infrared signal to sensor on driver or passenger front door handle that triggers opening of all windows and sunroof (ventilated seats turned on in equipped models). Since this happens when you close the door I would follow the door switch to the PSE and check for wires touching, check IR sensor and follow it to PSE looking for a contact with IR switch wiring. Sometimes moisture under the backseat can cause problems in the circuit board. If your backseat did have a moisture issue, you could find a CAN or PSE in the junkyard that is dry see if it might fix the issue?

Hope this is helpful.
__________________

1962 220Sb ~ The Emerald Bullet http://www.youtube.com/watch?v=hx6tN1W48_o
1957 Ponton 220S

2001 S600 Daily Driver
The Universe is Abundant ~ Life is GOOD!http://www.classiccarclock.com
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page