|
|
|
#1
|
|||
|
|||
Interior Lighting Problem
Ok i was going to replace the bulb that lights up the fiber optics for the Antenna Button and hazard light button etc on my 126. So i got the bulb out and everything seemed fine. I checked to make sure the instrument guage lights worked still and they did so i kept the bulb out. I go to the store an hour later and my guage lights wouldnt work. So i get home and put the bulb(the one behind the accessory panel) back in but now none of the lights work. Everything that is lit by fiber optics wont turn on. I checked 3 different bulbs and none work. Anyone have any ideas as to what happened? it bugs me cause now i cant see my guages at night.
|
#2
|
|||
|
|||
anyone know??
|
#3
|
||||
|
||||
Maybe the fuse?
__________________
John 2003 Firemist Red/grey leather SL 500 2015 Palladium Silver/black mbtex GLK 350 1987 Smoke Silver/burgundy mbtex 300E Sportline (SOLD) Click to see 87 300E |
#4
|
||||
|
||||
I'm sure you've checked the fusebox, but maybe there's an inline fuse, or fusible link somewhere down the line that's blown? Check the ground wire from the instruments too...you may have knocked it loose.
I'm just making educated guesses... Mike
__________________
_____ 1979 300 SD 350,000 miles _____ 1982 300D-gone---sold to a buddy _____ 1985 300TD 270,000 miles _____ 1994 E320 not my favorite, but the wife wanted it www.myspace.com/mikemover www.myspace.com/openskystudio www.myspace.com/speedxband www.myspace.com/openskyseparators www.myspace.com/doubledrivemusic |
#5
|
|||
|
|||
i think i probably could have knocked a wire loose somewhere, its a tight fit in there. I checked all of the fuses and theyre fine, and its not the bulbs. anyone know where the grounding wires are at?
|
#6
|
|||
|
|||
any other suggestions??
|
Bookmarks |
|
|