|
|
|
#1
|
|||
|
|||
Rear axle
Hi. Will some please tell me the tools and size I need to remove a rear axle on a 93 Mercedes 300se. W140. my boot split and cv joints gone. my brother has a good one he's selling me thank you very much.
|
#2
|
|||
|
|||
The axle is held to the diff with triple square bolts, 12mm I think but having a 10 and 14 handy wouldnt hurt. The axle is held to the hub with a 12 point nut either 30 or 32 mm. Everything else should be basic standard tools.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#3
|
|||
|
|||
Thank you sir I really appreciate it.
|
#4
|
||||
|
||||
And a sizeable torque wrench to reinstall the axle nut.
__________________
Prost! |
#5
|
||||
|
||||
Yup... This needs 290NM so... 1/2" drive long handle torque wrench!
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! Last edited by vstech; 08-12-2015 at 07:00 PM. |
#6
|
|||
|
|||
new axle
Quote:
pair left and right $160 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|