![]() |
|
|
|
#1
|
|||
|
|||
1994 E320 M104 Coil Pack Wiring
I have a 1994 E320 with wiring problems inside the spark plug area. The car runs on 4 cylinders, sometimes 2, and I've narrowed it down to the wiring. If i wiggle or twist the signal wire from the harness on the coil packs, sometimes they start firing off.
I want to know what my options are. Is it feasible or realistic to replace just the wiring that runs to the coil packs on the engine harness, or does the entire harness need to be replaced? If so, where could I buy the wires I need for just what I need? Is it just something I need to cut out of a donor car? Last edited by John5788; 12-06-2015 at 08:01 PM. |
#2
|
||||
|
||||
Known problem , the entire harness needs to be replaced. Search "wiring harness" "eco-junk" etc. is kind of pricey $$$$ 1100-1550 depends on type. or you can find a use one built after 1997, .... use the search button.
__________________
New Addition to the family 2013 Passat TDI 5Miles 2004 E500 4MATIC Wagon 95k 1996 E300 Diesel 173k Sold 1993 300E 2.8 230k Sold 1994 E320 White Wagon 373K Sold Still dreaming about ....500E Radu Negru |
![]() |
Bookmarks |
|
|