![]() |
|
|
|
#1
|
|||
|
|||
190E won't move in 1st or Reverse
Have a 722.4 that is second gear starting (I think it's supposed to?). If you put it into reverse you feel it go into a gear but if you push on the throttle it just revs up against the torque converter stall like you're brake boosting it.
In a straight line around the parking lot it shifts fine between 2 and 3, I don't have enough room to get up into 4th. If you select L to get the car into 1st it behaves the same as it does in Reverse. Acts like the parking brake is set. In neutral the car rolls freely and smoothly. I also noticed if you rev it up in Neutral it will creep forward a little bit. The fluid is nice and clean, doesn't smell bad and is a good color. Car has fairly low miles on it. Is this indicative of anything other than a bum trans? I would rather fix this trans than replace if it all possible, but I have never experienced this type of failure. The car has sat for about 10 years, some have suggested since 2-3-4 seem to work, get it out on the road at highway speed and just run it for a while and see if something unsticks. What say you PeachParts?
__________________
68 280SL - 70 280SL - 70 300SEL 3.5 - 72 350SL - 72 280SEL 4.5 - 72 220 - 72 220D - 73 450SL - 84 230GE - 87 200TD - 90 190E 2.0 - 03 G500 Nissan GTR - Nissan Skyline GTS25T - Toyota GTFour - Rover Mini - Toyota Land Cruiser HJ60 - Cadillac Eldorado - BMW E30 - BMW 135i |
Bookmarks |
|
|