|
|
|
|
|
#1
09-25-2016, 10:50 AM
|
|||
|
|||
|
Turn signal and headlight problem
Its like murphys law with my car now, just yesterday the right turn signal stopped working. If you hold the stalk up all the way it'll work but if not holding it, it'll not work. When key is in accessory there is a audible beeping from the fuse area when the right turn signal indicator is on(not working though) but if held up to make it work, the beeping goes away. Also my low beams haven't worked for a while now
|
|
#2
09-25-2016, 12:26 PM
|
|||
|
|||
|
What year make and model?
Sounds like turn signal stalk is bad re: turn signal. Beeping could be dirty fuse connection, my 124 did this when applying the brakes. Low beams??? are the bulbs proven good? Might be bad bulbs. Good luck and keep us posted...
__________________
"Rudeness is a weak man's imitation of strength" - Eric Hoffer
|
|
#3
09-25-2016, 12:26 PM
|
||||
|
||||
|
Is this on a car, truck, ute, ...?
__________________
 Gone to the dark side - Jeff
|
|
#5
09-26-2016, 01:57 PM
|
||||
|
||||
|
Quote:
Time to R&R turn signal stalk...BTDT.
__________________
1987 300SDL 314K mi, counting; #22 Head  1999 E300Turbo 405K original miles 1997 E320 180K mi (Son's) 2002 ML320 (Son's) 1998 S320 140K mi (Son's) sold 1985 300SD 311K mi 1984 300D 324K mi (killed by a hit-n-run turd) *************************************
|
|
#6
09-26-2016, 02:25 PM
|
|||
|
|||
|
Before you delve into R&R, "twirl" all the fuses. This is a yearly contact cleaning maintenance item not found in the manual
 . If this doesn't fix it, check the fuses. Not a visual but an electrical check with an ohm meter. "they look OK" isn't good enough. This should get the electrical part working. The having to hold the lever part is going to involve R&R.
__________________
Hanno '79 6.9 Sold (after 27 years) '83 280SL, 5 spd. '94 E320 Sdn. 5 spd conversion '02 E320 Sdn.(on loan to mom!) '87 300E (5 spd. conversion) Sold '05 E500 Wagon
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
