|
|
|
#1
|
||||
|
||||
Crankshaft oil seal
I am replacing my old front crankshaft seal with an ElringKlinger oil seal. The outside part that goes against the engine bore is ribbed, so my question is: Is this seal designed to use no sealant on the outer edge?
__________________
Don't Chrome them; polish them |
#2
|
|||
|
|||
Yes, no sealant.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
Bookmarks |
|
|