Quote:
Originally Posted by Rick76
When using a pressure bleeder with fluid in the container, make sure that the seals for the fluid level sensors on the reservoir are in good shape. If not you can have fluid flying all over. Happened to me once but luckily I had the garden hose close by. One of my W124's has a Girling reservoir and I need to replace seal boots every 5 years or so because they crack down the sides.
|
Very true Rick76. I usually take the reservoir off to clean and replace the grommets and rubber caps you speak of if needed.
12-01-2016, 07:43 AM
Threaded Mode
