|
|
|
#1
|
|||
|
|||
Name for debris guard below windshield?
I have a 1989 190D, and I broke the debris guard - the large plastic screen that goes below the windshield, to prevent leaves accumulating by the blower motor and battery.
Is there a formal name, or a part number, for this? I'd like to look at ebay and yards for a replacement. Bruce
__________________
W201 1989 190D |
#2
|
|||
|
|||
Cowling?
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#3
|
||||
|
||||
EPC just calls it "COVERING"
Part numbers I see are: 2018360002- ~$21 at the dealer 2018360402- ~$32 at the dealer 2018360502- ~$84 at the dealer Not sure which is correct but they should all be interchangeable. I'm not totally sure but there may be more perforations in one vs the others, that's at least what I have noticed while looking at the yards.
__________________
Current: 1975 450SEL, 83 300D, 88 Yugo GVX, 90 300D OM603 swap, 91 F150 4.6 4v swap, 93 190E Sportline LE 3.0L M104 swap, 93 190E Sportline LE Megasquirt, 03 Sprinter, 06 E500 4Matic wagon. |
#4
|
|||
|
|||
Most plastic parts have the part number molded into them. Have a close look at your broken one.
|
#5
|
|||
|
|||
201 836 00 02 up to ident # A179755
201 836 04 02 from ident # A179756 201 836 05 02 has no footnote
__________________
Mercedes Benz Master Tech - Retired |
#6
|
|||
|
|||
Thanks!
__________________
W201 1989 190D |
#7
|
||||
|
||||
Heater inlet vent
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|