I am doing some repair work on my 1994 Mercedes E320 wagon. I removed the throttle body and reasonance valve. After that, I noticed this dangling rubber hose connected to the underneath of the intake maifold.
There are two nipple hoses. The one facing me on the right in front of the intake manifold goes somewhere. The one on the left goes to the air/smog compressor behind the radiator on the lower right side facing me. Does anyone knows where this hose on the right connected to? Feedback/comments is greatly appreciated.

need a picture

Here is the picture of the intake manifold. The smaller hose nipple under the intake manifold facing you on the left under the green arrow. I think it goes to the throttle body that I recently removed. If so, I should have known better where that hose go to.

I thought I already add the picture in the attachment in my last post. Apparently, I already submitted the picture in my earlier post and for some reason there is an error uploading the attachment. Here is the location of the thread: 1994 Mercedes E320 wagon intake manifold large vacuum hose nipple broken

The picture of the intake manifold is under Post #1 lower right under the attachment. Hope that helps.

Yes sounds like 1 hose goes to throttle actuator, from intake, other to breather behind ac compressor area to a bracket

nulu, you are correct!! Now that I remember pulling the hose from the throttle actuator when removing it to have the throttle actuator repair. Little things like that to forget can make a world of difference. I need more brain power!!! Thank you, nulu.