Hi all,


Just wondered if anyone can answer what I'm sure is a simple question if you know these engines................ what is this small gold pipe fitting for behind the water pump pulley ?

Drain for when it leaks

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff

OK great so I don't have to worry about plumbing anything to it........that's good as it seemed like it wouldn't be possible to get anything connected to it without fouling the pulley..... I assumed it was some kind of drain, but it had a barb on the end like it was expecting some kind of hose to be attached so just wanted to check

Thanks very much for your help.