Environmental Controls (300e)

Hi Everyone,

I'd like to remove the Zebrano Wood panel that houses the
environmental controls on my 1988 300e. I've done a search on
the topic, but I didn't have much luck. Could anyone tell or
at least direct me to a thread with the info I need?

I can get as far as removing the radio and ashtray as that
information is in the DYI section.

Thanks in advance,

bluebenz

Thats really easy, i did that awhile ago when i had to replace my hazard switch...look down by the ash tray, then look a little up, past the Radio, there should be 2 screws holding that whole piece in...i hope this is the info ur looking for.

Good Luck

wait, when u mean "environmental controls" u mean the A/C controls right?

Thanks Chris17h,

I'll give that a try. And Yes, I did mean the AC controls.

Thanks again.

bluebenz

[csnow]

Try this. It has pictures and everything...

http://www.peachparts.com/Wikka/W124Stereo