|
|
|
#1
|
|||
|
|||
Environmental Controls (300e)
Hi Everyone,
I'd like to remove the Zebrano Wood panel that houses the environmental controls on my 1988 300e. I've done a search on the topic, but I didn't have much luck. Could anyone tell or at least direct me to a thread with the info I need? I can get as far as removing the radio and ashtray as that information is in the DYI section. Thanks in advance, bluebenz |
#2
|
|||
|
|||
Thats really easy, i did that awhile ago when i had to replace my hazard switch...look down by the ash tray, then look a little up, past the Radio, there should be 2 screws holding that whole piece in...i hope this is the info ur looking for.
Good Luck wait, when u mean "environmental controls" u mean the A/C controls right? |
#3
|
|||
|
|||
Thanks Chris17h,
I'll give that a try. And Yes, I did mean the AC controls. Thanks again. bluebenz |
#4
|
||||
|
||||
|
Bookmarks |
|
|