|
|
|
|
|
#1
11-29-2017, 07:44 AM
|
||||
|
||||
|
CTA 7088 coolant fill tub info needed
Hi just purchase one of these radiator fill tanks [picture] to re -fill my radiator on the w124 260e M103 . But it came with no instructions .
Can any member help in step by step procedure please ? . 
|
|
#2
11-29-2017, 12:25 PM
|
|||
|
|||
|
I don't understand why you would need all that gear. The system is easy to drain and fill with simple hand tools, a funnel, and a couple of lengths of hose or tubing to fit the radiator and engine block drain valves.
Read this nearby thread. w126 300sel Coolant replacement Duke
|
|
#3
12-07-2017, 07:24 PM
|
||||
|
||||
|
Assume you know name of company that made the gadget. Try youtube.
Lisle makes a gadget like this for burping the system. Many videos on YT. Here's one: https://www.youtube.com/watch?v=-akD-7JD9x4
__________________
Mike Murrell 1991 300-SEL - Model 126 M103 - SOHC "Fräulein"
|
|
#4
12-08-2017, 09:29 AM
|
||||
|
||||
|
Mike I looked at the fill system on youtube but its not the same .
But I did find one video for the fill system I purchased . Thanks for your help ..
|
 |
| Bookmarks |
|
|
Linear Mode
