|
|
|
#1
|
|||
|
|||
95 e320 codes
pin 8 keeps giving me 25 and 33 blinks. i cant seem to fix them. can anyone help me out?
updated harness and throttle actuator new o2 sensor, cam sensor, copper Bosch non resistor plugs, engine coolant temp sens, ovp relay is there anything else that would trigger a cam sensor code? maybe the magnetic cam adjuster? then with code 33..also a cam related code. what do i have to do to eliminate some fault possibilities? the car starts beautiful everytime, buttery smooth idle, the only thing is that it lacks low end power till about 3000 rpm. i have another w124 with about 300k miles that pulls hard from idle so i can tell that something is wrong. i got a hunch that the po owner had this apart and didnt set the magnetic cam timing properly would a cam adjuster not set give me a 25 and 33 code?
__________________
1993 e300 1995 e320 1994 e320 2006 s500 4matic 2004 Jeep wj overland 2001 Ducati 748 2004 Honda shadow aero Last edited by speednjay; 01-27-2019 at 01:00 AM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|