Originally Posted by 85 DSEL

Ok so I'm trying to do a FULL DRAIN of the tranny AND TORQUE CONVERTER.

Working by myself in having no luck bumping the starter and getting under the car to see if I can see the TC drain then back in the car to bump it again and so on. I do not want to have to take time to remove the viscous clutch fan to access the 27mm bolt to manually turn the motor over.

Is this my only reasonable solution to get a full drain of the fluid or is there another? I don't want to put new filter and enough fluid minus the TC only to have it mix/blend together to give a mediocre fluid change. Any ideas certainly welcome - running out of time today.... Thanks

Dale

Originally Posted by Zulfiqar

The fan blade has an offset blade where you can stick a ratchet and socket on the crank bolt to turn it. Not too difficult when the car is on ramps or jackstands.