|
|
|
#1
|
|||
|
|||
300D Turbo question (valves)
Thank Gents for your advice on my feeler gauges. Now I'm ready to adjust the valves. Now just to be sure I would like to get pointers on the actual adjustment, I have done the first intake and exhaust but its difficault to tell when the came lobe is in the right position,so I don't know if what I did will get me the desired results.
Thanks in advanced Roboman |
#2
|
||||
|
||||
I adjust them with the lobe 180 degrees away from the contact point.
__________________
Jim |
Bookmarks |
|
|