Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 06-10-2002, 08:15 PM
Posts: n/a
300D Turbo question (valves)

Thank Gents for your advice on my feeler gauges. Now I'm ready to adjust the valves. Now just to be sure I would like to get pointers on the actual adjustment, I have done the first intake and exhaust but its difficault to tell when the came lobe is in the right position,so I don't know if what I did will get me the desired results.

Thanks in advanced
Reply With Quote
Old 06-11-2002, 06:49 AM
engatwork's Avatar
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,878
I adjust them with the lobe 180 degrees away from the contact point.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 09:26 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page