Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-13-2002, 12:01 PM
junior member
 
Join Date: Oct 2001
Posts: 592
torque specification//spark plugs

did a search and was able to find a torque specifcation for spark plugs for a 112 engine. 28nm and, if my conversion is correct, 247inlbs. question. this approximately 20ftlb figure hold for the engine in an 89 300e? working on someone else's car and do not want to screw up. thank you.
p.s. will be using a bean type torque wrench calibrated in inlbs.
Reply With Quote
  #2  
Old 06-13-2002, 12:26 PM
Registered User
 
Join Date: Dec 2001
Posts: 571
A quick, yet accurate way to convert Nm is to take 3/4's of that value to get ft. lbs. 20 lbs is pretty close.

I have always torqued my plugs(M103) to 15 ft. lbs just to play it safe. To date this has worked fine.

My 2 cents.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page