Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-29-2019, 07:57 PM
Registered User
 
Join Date: May 2010
Location: BAKERSFIELD, CA
Posts: 1,484
95 w124 can’t shake the codes

Pin 8, .. 13,25,33,35 blinks. Replaced my 3rd engine harness because the cam sensor line was intermittent. Almost every sensor is new. I’m running out of ideas

__________________
1993 e300
1995 e320
1994 e320
2006 s500 4matic
2004 Jeep wj overland
2001 Ducati 748
2004 Honda shadow aero
Reply With Quote
  #2  
Old 12-03-2019, 04:00 PM
RobertFini's Avatar
Registered User
 
Join Date: Oct 2002
Location: Port Elizabeth, NJ
Posts: 277
Are there any evident driveability symptoms? The 13/33/35 codes are pointing me toward a vacuum leak, but I tend to overthink things sometimes. Also, I know this sounds rudimentary, but make sure to clear the codes and see which ones come back.

Best Regards,
Rob
__________________
Robert Fini

'12 ML350 BlueTec, 100k
'06 E320CDI (x2)
'05 T1N Sprinter 2500/Pleasure-Way Plateau TS, 70k
'97 C36AMG, 319k (son's)
'94 E320T, 249k
'93 190E Sportline LE, 168k (daughter's)
'84 190E-2.3/5spd (Stage Rally Racer)
'66 230 W110 Sedan (Barn Find, Vintage Racer build in progress)
Reply With Quote
  #3  
Old 12-03-2019, 09:36 PM
Registered User
 
Join Date: May 2010
Location: BAKERSFIELD, CA
Posts: 1,484
Quote:
Originally Posted by RobertFini View Post
Are there any evident driveability symptoms? The 13/33/35 codes are pointing me toward a vacuum leak, but I tend to overthink things sometimes. Also, I know this sounds rudimentary, but make sure to clear the codes and see which ones come back.

Best Regards,
Rob
Run beautiful. If it wasn’t for the light on the dash id say it runs perfect. I’ll double check the vac connectors. Gotta get this cleared up so I can smog it.
__________________
1993 e300
1995 e320
1994 e320
2006 s500 4matic
2004 Jeep wj overland
2001 Ducati 748
2004 Honda shadow aero
Reply With Quote
  #4  
Old 12-04-2019, 05:28 AM
oldsinner111's Avatar
lied to for years
 
Join Date: Nov 2008
Location: Elizabethton, TN
Posts: 6,296
any way to supply short burst of power for light after ignition,like using a cap?
__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran, deutschland deutschland uber alles uber alles in der welt
Reply With Quote
  #5  
Old 12-25-2019, 04:01 PM
Registered User
 
Join Date: May 2010
Location: BAKERSFIELD, CA
Posts: 1,484
Found a vac line off. Only have the pin 8 25 blink code that won’t stay off. I’ve had that code for about 2 years. Not sure what to do about it
__________________
1993 e300
1995 e320
1994 e320
2006 s500 4matic
2004 Jeep wj overland
2001 Ducati 748
2004 Honda shadow aero
Reply With Quote
  #6  
Old 12-25-2019, 04:41 PM
RobertFini's Avatar
Registered User
 
Join Date: Oct 2002
Location: Port Elizabeth, NJ
Posts: 277
That's the cam sensor.

You said in your original post that you've had trouble with this and that "almost" every sensor is new, so I'm assuming that that's one of them. You also said you've replaced the engine wiring harness three times. I was getting weird codes about voltage levels being implausible and just by chance had to replace the lower engine harness (the one with the positive battery lead), after which these codes disappeared; I suggest that you check the condition of the lower harness.

Best Regards,
Rob
__________________
Robert Fini

'12 ML350 BlueTec, 100k
'06 E320CDI (x2)
'05 T1N Sprinter 2500/Pleasure-Way Plateau TS, 70k
'97 C36AMG, 319k (son's)
'94 E320T, 249k
'93 190E Sportline LE, 168k (daughter's)
'84 190E-2.3/5spd (Stage Rally Racer)
'66 230 W110 Sedan (Barn Find, Vintage Racer build in progress)
Reply With Quote
  #7  
Old 12-25-2019, 07:03 PM
Registered User
 
Join Date: May 2010
Location: BAKERSFIELD, CA
Posts: 1,484
Quote:
Originally Posted by RobertFini View Post
That's the cam sensor.

You said in your original post that you've had trouble with this and that "almost" every sensor is new, so I'm assuming that that's one of them. You also said you've replaced the engine wiring harness three times. I was getting weird codes about voltage levels being implausible and just by chance had to replace the lower engine harness (the one with the positive battery lead), after which these codes disappeared; I suggest that you check the condition of the lower harness.

Best Regards,
Rob
The lower harness is new. I have an oscilloscope but have no idea how to use it to check the output of the sensor. I’ve swapped the cam parts from my 94 to see if things change but no change. The only thing I haven’t changed was the ecu.

MAybe the ecu is fubared from the po driving for such a long time with bare wires touching everything?

__________________
1993 e300
1995 e320
1994 e320
2006 s500 4matic
2004 Jeep wj overland
2001 Ducati 748
2004 Honda shadow aero

Last edited by speednjay; 12-27-2019 at 12:24 PM.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page