Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-26-2002, 11:21 AM
rpmillie
Guest
 
Posts: n/a
C230 A/C Diagnostic display (Climate control)--How to use

I need detailed information on how to use the diagnostic fuction of the climate control display on a 97 C230.

I found sevral bits on information in the archives and variuos posts on this topic for other models.

If someone has or knows where I can get the complete story on a 97 C230, PLEASE let me know.

Thanks for your time.

Reply With Quote
  #2  
Old 06-26-2002, 12:44 PM
JCE's Avatar
JCE JCE is offline
Down to the Wear Bars
 
Join Date: May 1999
Location: So Kalifornia
Posts: 2,189
This is what David C Klasse worked out for his 95 C280, and it seems to be the same for my 98 C230, so maybe it works for you:

With ignition in on position, turn climate controls on, then press and hold REST for 5 or so seconds, or until you see an 01 flash then another number will flash (inside temp), then back to one, use the arrow up (defrost) and arrow down (feet) to scroll up and down through the codes.

1. In-car termperature sensor (with aspirator blower)
2. Outside temperature sensor
3. Heater core temperature sensor
5. Evaporator temperature sensor
6. ECT sensor (Coolant temp.), e.g. 12*5 = 125C
7. Refrigerant pressure in bar, e.g. 12*8 = 12.8 bar
8. Blower control voltage, e.g. 16*5 = 1.65 volts
9. Software status of A/C pushbutton control module
15. Selected in-car temperature
20. Version code
21. Engine Speed (RPM), e.g. 6*0 = 600 rpm
22. Terminal 58d (Bat. Volt.), e.g. 99.0 = 99% of voltage
23. Vehicle speed (Kilometers Per Hour)
50. Not used – 00
51. Number of current slip recognition (poly-V-belt)
52. Number of stored slip recognitions (poly-V-belt)
__________________
John

2003 Firemist Red/grey leather SL 500
2015 Palladium Silver/black mbtex GLK 350
1987 Smoke Silver/burgundy mbtex 300E Sportline (SOLD)

Click to see 87 300E
Reply With Quote
  #3  
Old 06-27-2002, 04:58 PM
rpmillie
Guest
 
Posts: n/a
Thanks John and David for the information. However, I guess it is different for a 97 C230. I was able to navigate through the various items starting with "01". While some of the items were the same as listed above in your post, many were not. Also, I had many more not listed above.

Does anyone have or know where I can get the ACC codes for a 97 C230? Does anyonw know if this information is contained in the 'ALLDATA' listing for this car. I would gladly pay $25 to demystify this and a couple of other things.

Thanks for the help.
Reply With Quote
  #4  
Old 06-28-2002, 01:42 AM
David C Klasse's Avatar
CheFrac is Back!
 
Join Date: Jan 2001
Location: Mission Hills in the City of San Diego
Posts: 2,355
Ron,
I'm sorry I haven't replied yet. I have had so much to do, I had your e-mail "Keep As New" so that I would do it.
Anyways, looks like I took too long! I do apologize for that.

As far as the system goes, yours should be fairly similar to mine. John (JCE) says his is similar to my 95, so I assume yours should be too.
However, there are differences, as you have noticed. I do not have information for the exact values/meanings of your 97 C230's PBU.

The only thing I can think of is to send a msg or an email or post directed to SteveBFL. He is very knowledgable in this area and has the resources for all printed data regarding the values.
He was kind enough (10x over) to fax me a list (official MB doc I believe) containing the code meanings to my car.

Good luck. It really is an awesome feature!
__________________
2006 E350 w/ 155k miles (Daily Driver)

Previous:
1993 300E 3.2L Sedan w/ close to about 300k miles
2003 E500 Brilliant Silver (Had 217k miles when totalled!)
1989 300E with 289,000 miles (had for <1 yr while in HI)
03 CLK 500 cabrio (Mom's)
2006 C230k (Dad's)
1999 S420 (Mom's/Dad's)
2000 C230k Sport sedans
2001 CLK320 Cabrio (Mom's)
1995 C280 My First Mercedes-Benz... (155k miles. EXCEPTIONAL AUTOMOBILE. Was Very hard to let go of!)
Reply With Quote
  #5  
Old 07-26-2002, 05:15 PM
Registered User
 
Join Date: May 2001
Posts: 7
My parent's 94 C280 is currently undergoing a/c woes. The a/c is not blowing cold air even after a recharge, and all you get is what seems to be outside air. Their mechanic told them that the push button unit needs to be replaced. The price quoted for the part is $840, plus labor. I promised my parents that I will do some research on the a/c problem before they fork out their retirement fund.

Last night I tried this display diagnostics. My question is, how do you interpret the numbers from the climate control display diagnostics? For example, with the engine off but the ignition at ON position, I'm getting numbers that are quite different from David Klasse's example. Some of my numbers are as follows - I'm working from my memory.

7 - Refrigerant Pressure in Bar - 04.3
8 - Blower control voltage - 21.0
9 - Software status of a/c Pushbutton control module - 02
22 - Terminal 58d (Bat Volt) - 0.00

I will try to get more detailed numbers tonight, i.e. standstill vs driving and at HI, LO, 72 degrees. But, I still need to know how to interpret these numbers. For example, is David Klasse's numbers the norm?

Any help you can provide would be greatly appreciated.

Edward
__________________
Edward Cho
Menlo Park, CA
1983 Porsche 944
1995 C280
Reply With Quote
  #6  
Old 07-27-2002, 05:13 AM
Registered User
 
Join Date: Oct 2000
Location: Taiwan
Posts: 21
7 - Refrigerant Pressure in Bar - 04.3
8 - Blower control voltage - 21.0
9 - Software status of a/c Pushbutton control module - 02
22 - Terminal 58d (Bat Volt) - 0.00


Ed,

My 94 C220 should be exactly the same as yours. Your readings look normal while enginer off. 22 represents AC compressor RPM and it is, of course, 00 when engine is off.

Start your enginer then check 22 again to see if it goes up with the engine rpm. If so, the compressor does kick in. If not, the compressor clutch might be out or the PCU controller shut the clutch down due to some error codes there.

To read the PBU's error codes follow the procedure,
Key on with enginer off
Set temperature to LO
Press REST and "Defrost" buttons at a time for over 2 seconds (must be done in 20 seconds from last step"
If you see the LED on recirc button is flashing at 1Hz freq and screen shows "diR" you are in error code retrieving mode.
Press AUTO to read a contineous error codes at a time
Continue press AUTO and write all codes in your note until screen shows End

Now press AUTO again to read the intermittent codes.
Same procedure as contineous code reading above until screen shows End.

Make sure you log all the codes in your note. Let's see what you get.

Now the procedure to clear these codes,

Press '^' and 'V' at a time the screens shows "---". Codes being cleared.

The last step is somewhat different from what I experienced in my car. Manual says press ^ and V again to exit but I never success. So I simply turn key off, then start engine again. Turn AC on to see if you get cool air back. You can also check 22 to see if the compressor is running.

Hope it helps.

Charles from Taiwan
Reply With Quote
  #7  
Old 07-27-2002, 05:29 AM
Registered User
 
Join Date: Oct 2000
Location: Taiwan
Posts: 21
This is what I got from my Chinese version repair manual.
After August 1995 MB changed diag program and the AC system.


1. In-car termperature sensor (with aspirator blower)
2. Outside temperature sensor
3. Heater core temperature sensor
4. Evaporator temperature sensor
5. Engine coolant temp. sensor
6. Refrigerant pressure in bar, e.g. 12*8 = 12.8 bar
7. Blower control voltage , e.g. 16*5 = 1.65 volts
8. N/A for 1995 model, Refrigerant temp. sensor for 1996
9. N/A
10. Blower control voltage (seems the same as 7, not sure)
20. Aux fan control current, 7=7mA
21. Engine Speed (RPM), e.g. 6*0 = 600 rpm
22. Vehicle speed (Kilometers Per Hour)
23. PBU illumination adjustable voltage, 88=88% input voltage)
40. Softare status
41. Hardware status
42. Version code 1 (ex.03)
43 Version code 2 (ex. bEn=gas engine)
50,51,52 not used
53. Compress status (On-Off)

JCE, I copy some of your typing. Hope don't mind!

Thanks
Charles
Reply With Quote
  #8  
Old 07-27-2002, 10:04 AM
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
Well, as to the 58d, I'm pretty sure that is the illumination input. It should go up when the lights are on and the dash illumination is set highest.

The early and late systems are definitely different. The biggest change being the size of the display. Being at home I can't lay out any lists but the extent of diagnostics goes beyond actual values and fault codes to the activation of air flaps in the dash.

I wrote an article for "Import Car". It can be viewed at my site:
http://www.continentalimports.com/ser_ic40142.html

The article is specific to a 97 210 chassis, but the information is similar for all chassis.
__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote
  #9  
Old 07-27-2002, 08:03 PM
Registered User
 
Join Date: May 2001
Posts: 7
Thanks Charles & Steve for your help. I had the opportunity to study the problem in detail, and the diagnostic told me that the compressor was not running, even with the engine running. I got the fault codes and everything and I was about to post the result when I noticed that a connection was loose at the compressor. Presto, and the a/c is working fine now. I guess it must have been a power supply or something to the compressor.

Anyhow, I'm glad my parents have saved big bucks, and kinda pissed off that the mechanic may have been trying to take my elderly parents for a ride. Well, I guess it's time for a new mechanic.

Charles, are you in Taipei? I was an investment banker covering Taiwan & Korea a few years back, and visited Taipei & Shinzhu Science Park several times. Great tasting food, extremely hot weather. Always stayed at the Sherwood. Enjoyed the snake alley but didn't have the courage to drink the snake drink. Thanks again for your help.

Edward
__________________
Edward Cho
Menlo Park, CA
1983 Porsche 944
1995 C280
Reply With Quote
  #10  
Old 07-28-2002, 01:31 AM
Registered User
 
Join Date: Oct 2000
Location: Taiwan
Posts: 21
Ed,

I am glad to know you got the cool air back. Yes, when AUTO being pressed the PBU sends a 12V voltage to compressor's electromagnetic clutch to engage the compressor.

I am a program manager leading a design team design server product for Compaq (now it becomes HP). Sometimes I will visit Houston Compaq headquarter to discuss product issues. In Taiwan I live just the half way between Taipei and Hsinzhu science park. Only 40 minutes drive to Taipei from my home. I was graduated from Chiao-Tung Univ. which sits right next to the science park.

To save precious storage space in this great site, let's talk personal things by email, OK!

I am happy I could help.

Charles from Taiwan
Reply With Quote
  #11  
Old 08-01-2003, 12:02 PM
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
Those aren't codes, they are actual values. The first shows the signal voltage to the fan controller (I presume) and it is likely the fan wouldn't be on with the engine and AC off.

The second is the voltage signal for dash illumination and would have no value unless the lights were on.
__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote
  #12  
Old 08-01-2003, 02:02 PM
blackmercedes's Avatar
Just a guy
 
Join Date: Dec 2000
Location: St. Albert, Alberta, Canada
Posts: 3,492
Check the evaporator temp sensor readings. If the temp reading is anything other than around 4-6C with the engine running and the AC system not on EC mode, than you probably have a problem. Evap temp sensors failure is not an unusual reason for AC difficulties.
__________________
John Shellenberg
1998 C230 "Black Betty" 240K

http://img31.exs.cx/img31/4050/tophat6.gif
Reply With Quote
  #13  
Old 08-03-2003, 01:49 PM
sticksms's Avatar
Registered User
 
Join Date: Apr 2002
Location: Northern Virginia
Posts: 24
AC problems

Sorry to keep harping on AC stuff - I just brought my 98 C280 back from the dealership after getting sch B service and noticed that my ac wasn't working. They are now closed until Monday - I haven't been able to talk to anyone there about this yet.
I thankfully found this thread -did what Charles said - got the diagnostic info and the error codes, deleted them, started up the car and had cold air again. My hope is that someone one here can tell me if the values below are WNL for the car - I just hope that the dealership didn't screw anything up!

Continuous error - dlA 241
intermittent errors - 22.7 23.1 23.3 24.7 41.6 41.7 41.9
__________________
1998 Black/Black C280 Sport w/ 81,000 miles
Reply With Quote
  #14  
Old 08-03-2003, 01:50 PM
sticksms's Avatar
Registered User
 
Join Date: Apr 2002
Location: Northern Virginia
Posts: 24
Oops I forgot to include the "REST" button results:
01 98 F
02 92 F - 104 F
03 67 F - 75 F
05 90 F
06 141 - 185
07 13.6 - 17.7
08 127 - 131
09 33 F - 35 F
10 495
20 02.0
21 060 - 070
22 000
23 000
24 13.5 - 13.7
40 03
41 03
42 02
43 6 - C
50 66 F - 68 F
51 LO
52 50 F
54 OFF

My diagnostic info doesn't quite match some of the charts listed throughout this thread and the error code list on Steve's article doesn't quite match mine -- if my 241 is his B1241 then it means refrigerant fill?? The thing was blowing nice cold air on the way to the dealership and nothing on the way home ... is it possible that they mistakenly did something wrong causing the ac to stop working?

Thanks in advance to anyone that can help me and thank you to those who contributed to this thread - it is because of you I got my ac back without another wasted day trip to the dealer - I just hope I don't have to go back again for a while
__________________
1998 Black/Black C280 Sport w/ 81,000 miles
Reply With Quote
  #15  
Old 08-03-2003, 03:31 PM
blackmercedes's Avatar
Just a guy
 
Join Date: Dec 2000
Location: St. Albert, Alberta, Canada
Posts: 3,492
I would hazard a guess that something is amiss. Your refrigerant pressure values look good (13.6 to 17.7 bar) but your evap temp seems to be 90F. That's miles too high.

Did Charle's code retrival method work on your 1998?

__________________
John Shellenberg
1998 C230 "Black Betty" 240K

http://img31.exs.cx/img31/4050/tophat6.gif
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page