Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 07-07-2002, 03:04 PM
AMGmercedes's Avatar
Senior Member
Join Date: Jun 1999
Location: Baltimore, MD
Posts: 203
m103 cap and rotor question

Here is the question. Is there anything that can cause the number 2 and 5 cylinders (180 degrees apart on cap) to not fire besides a bad cap/rotor? The wires are good as I tested them in the firing cylinders. Im not even talking about fuel problems etc becasue there is no spark at those 2 cylinders. Maybe crank position sensor or EZL? The engine is used so I dont know if it was doing it before and the cap and rotor do show some wear. Thanks.
Reply With Quote
Old 07-07-2002, 05:41 PM
Gilly's Avatar
Registered User
Join Date: Mar 2001
Location: Evansville WI
Posts: 9,616
One thing to check is the rotor bracket, the metal part that the rotor attaches to. Make sure it hasn't cracked.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 05:34 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page