|
W126 Rear Hub Replacement.
I screwed up big time. While installing 20mm H&R spacers in the rear to fit the 16" wheels from a R129, I managed to strip one of the holes and one is borderline stripped. Not sure how this happened, as I put them in by hand, it looks like the 20mm H&R bolts are pretty soft.
Anyway I have a new project this week  I found a hub in the JY, what would be the best and easiest approach; just replace the hub and while I'm at it replace the bearings and handbrake shoes as well or replace the entire assembly including the trailing arm. Or I can see if I can repair the thread?
Looking at this write up, this doesn't looks like an easy job...
https://www.peachparts.com/shopforum/diesel-discussion/206875-replacing-rear-wheel-bearings-w123-w126.html
__________________
1979 Black on Black, 300CD (sold), 1990 Black 300SE, Silver 1989 Volvo 780, 1988 300CE (vanished by the hands of a girlfriend), 1992 300CE (Rescue).
Last edited by Jorn; 06-02-2025 at 08:21 PM.
|
06-02-2025, 08:00 PM
Threaded Mode
