Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 08-22-2002, 08:16 PM
Registered User
Join Date: May 2000
Location: Georgetown, MA
Posts: 84
300E Need measurements

I am repairing some front end damge to a 86 300E. I am replacing the upper radiator support, the piece that has the information plate attached. It is welded to the inside of the fender frames. Before I tach weld it in place I need a measurement to ensure the placement of the fenders is correct.
I need the measurement from the inside of the right fender to the inside of the left fender across the middle of the upper radiator support. One of the fenders had minor damage to the front end and I have restored it to original shape. None of the MB manuals has this information, so I am hoping that someone would take the time to make this measurement. Thank You
John Olszewski

1982 380 SEL (Euro)
1984 300SD
1986 300E (Euro)
1990 300SL
Reply With Quote
Old 08-22-2002, 11:43 PM
public enemy
Posts: n/a
Can you possibly draw a diagram or something to show exactly what you want to be measured, so that I can give you a pecise measurement like you need?
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 09:24 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page