Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 08-26-2002, 11:29 PM
Posts: n/a
Angry 280E water pump replacement

I've got as far as removing the radiator, fan, and all the belts to get to the water pump. Unfortunately, it looks like one more step to reach the bottom bolt on the water pump. Covering it is what appears to be a timing wheel with the accessory pulleys in front. There is one 27mm bolt which appears to hold this all to the crankshaft. I'm unable to get this loose and am wondering if it could possibly be reverse threaded due to the direction of crankshaft rotation. I have several more tricks to try and get it loose, but I would hate to be going in the wrong direction. There also appears to be 6 hex bolts holding the front pulleys on, is it necessary to remove those to remove timing disc which covers the water pump bolt? Any help would be appreciated.
Reply With Quote
Old 08-27-2002, 01:37 AM
Join Date: Feb 2000
Location: seattle, wa
Posts: 87
the 27mm bolt does not hold the timing balancer on. remove the hex bolts and the pulleys and just work the balancer off.
Reply With Quote
Old 08-27-2002, 07:44 AM
Posts: n/a
Thanks Paul. That will save me a little heartburn.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 03:29 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page