Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Closed Thread
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-08-1999, 07:14 PM
Greg
Guest
 
Posts: n/a
To narrow down my problems (in relation to my previous posts), I figured out that my hesitation/acceleration problem only occurs when I press on the accelerator to speed up. I have no problems if I am holding a steady speed,and the problem is more pronounced at highway speeds. I put in new fuel filters today, replaced all bad vacuum lines and reconected my EGR valve, but I still have this problem when I push the accelerator way down. Otherwise the car runs fine. What would be causing this? Fuel pump? Injectors? Water or contamination in the gas tank? Thanks for the help.

Greg
'83 300D 158K
  #2  
Old 07-08-1999, 09:50 PM
Greg
Guest
 
Posts: n/a
One other thing - I did notice one of the rubber fuel lines connecting the injectors is seeping fuel. Would this cause and acceleration hesitation problem? I'll replace it tomorrow to elliminate this possibility. Thanks
  #3  
Old 07-08-1999, 10:14 PM
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
The other thing that can cause this is no turbo boost to the anaroid valve. I have seen this a number of times.

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM


Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hesitation again ('90 300SE) fahrgewehr2 Tech Help 1 11-12-2003 05:40 PM
Hesitation Problem Solved (hopefully) Mike G Tech Help 2 11-07-2003 12:26 PM
Any suggestions on hesitation from standstill? Ron Brooks Tech Help 4 09-15-2003 12:48 AM
Any suggestions on hesitation problem? Ron Brooks Off-Topic Discussion 0 09-14-2003 01:20 PM
hesitation between 5500-7000 rpm Joreto Tech Help 0 05-17-2002 04:24 PM



All times are GMT -4. The time now is 11:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page