Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Closed Thread
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-09-1999, 10:59 AM
AStefanov
Guest
 
Posts: n/a
My MB is running extremely rough when stationary. It sometimes stalls out. My local Non-MB repair facility says that my injectors need adjustment or replacement but that he cannot do it. He recommended taking it to a MB dealer for repair. What's involved with adjusting or replacing the injectors? How long should it take? Approximately how much should it cost to adjust? Replace? More importantly, do you think my non-MB mechanic is right or is there something else I should check first?

Thanks
AStefanov
  #2  
Old 07-09-1999, 10:50 PM
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
Your car probably has problems with the contact point assy in the disributor. All of these old cars had this problem. The other thing that is common is for the EFI control module to have a fault. The reason your mechanic sent you to the dealer is he doesn't know anything about this car. You need the manual to properly understand even the basics of how the EFI works on these early cars and even then you can get lost in it. Take it to an old timer that has been working on them for many many years for best results! The dealer will be lost too unless the old timer still works there.

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM


Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Genuine Bosch rebuilt injectors – Poor Quality? RunningTooHot Diesel Discussion 28 05-13-2015 06:32 PM
Trying to get 74 450SE running after sitting 20 years - Long repost from tech section justinbowser Vintage Mercedes 35 08-02-2008 09:07 AM
Fuel injectors hbofinger Tech Help 10 05-25-2005 11:00 PM
Trying to get 74 450SE running after long sleep! - LONG justinbowser Tech Help 2 02-22-2003 09:40 PM
Genuine Bosch rebuilt injectors (Diesel) – Poor Quality? RunningTooHot Tech Help 8 11-16-2001 10:34 PM



All times are GMT -4. The time now is 09:35 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page