Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 09-28-2002, 09:52 AM
Posts: n/a
Fuel Sending Unit on 97 E320

I need to clean and examine the sending unit in the fuel tank. Gas gauge is very erratic and have been told that the sending unit may have to be cleaned or replaced. I am not very familiar with the procedure on how to remove the unit from the tank. As per your instructions, I removed the carpet and found a large white 3" cap near the top of the tank. Where would you place the large socket or wrench to remove the cap or must the cap be remove first to access the nut. Please describe in detail. Thank-you for the info so far.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 08:43 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page