I'm just curious what is involved in replacing the differential mount on a w123 (mine is an '84 300D). Can it be done without removing the halfshafts? Does it have any affect on the ride height? The subframe mounts seem kind of difficult to do myself, but it looks like the differential mount can just be replaced by jacking up the car, supporting the diff., and unbolting the mount from the frame and diff. Let me know if there is more to it than that.

Thanks,

GregS
'84 300D

1984 300d Their Is 4 Top Bolts 2 Bolts On Back Of Mount, Jack Up Diff And Remove Bolts And Install Curve Part Toward Front, Start Top 4 Bolts Then 2 Large Bolt $58.00 Car Will Be Higher. Change The Diff 90 Wt Oil One Pt Remove Fill Plug With 14mm Allen
And Than Botton Drain Plug. I Use A 2ft Breaker Bar. Check Simi Axles 4 Boots For Cracks & Leaks, Jack Up 2 Ea. Rear Wheels Near Shocks. Axles Are Diy $325 Ea.go To Pindelski.com For Diy.