I'm stuck in the middle of changing the waterpump on my 1991 300TE 4matic. I can't seem to get access to the rear two bolts. I followed the steps in the CD but it gives no hint as to how to get those back two bolts out. It looks like I have to remove the intake manifold and I'm not sure that I want to do that. Any body have a hint?
TIA

Paul
The top rear one is the only one that's hard for me. i bought a 13mm swivel socket, that helps alot. The bottom rear is fairly accesable with the correct length extension.

Gilly

__________________
Click here to see the items I have up for auction at EBay

Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)

The swivel socket Gilly mentioned is discussed in this thread.

Benzmac water pump Snap On FLX-13

__________________
Mike Murrell
1991 300-SEL - Model 126
M103 - SOHC
"Fräulein"

Thanks guys, I hope that the swivel and sonme different extensions will work. What a PITA. I think they could have engineered the whole thing alot better, it's ok for the assembly line, but little thought given to service work!. :p