|
|
|
|
|
#1
10-15-2002, 08:26 PM
|
|||
|
|||
|
AC compressor ......front door key assembly...
Just a few questions....#1...Are the last six digits on the vehicle Vin# the engine number? If not, how do I find it easily? #2...Being an 86' 300E, does anyone know if the AC clutch pulley is a 4.5", 5" or other size pulley? #3.... When I buy a rebuilt AC with a clutch assembly, does it matter which size pulley/AC compressor I get? Finally, ...#4... The little cap on my door lock fell off. Is their an easy way to remove one at a junk yard and put it back on, or is this a take the door apart and remove the entire assembly?
Thanks in advance, Geof 86'300E Vin# WDBEA30D8GA107534 
|
|
#2
10-16-2002, 08:15 PM
|
|||
|
|||
|
Engine number
Your engine number is 103983-12005249 chassis number is 124030-1A107534 auto trans number is 722320-02702127
this information should be in your service book at last page ( blue datacard ) A\C pulley have to be the same size
__________________
MB STARS Master Guild Technician,17 years MB tech 14 years independent shop owner
|
|
#3
10-17-2002, 10:01 AM
|
|||
|
|||
|
AC/Pulley-clutch
Since the pulley has to be the same on my 86 300E for the AC, is it easy to take off the pulley/clutch assembly of the old compressor and put it on another compressor? If it is fairly easy, may I go to the salvage yard, and get an 86' compressor used, and change the pulley/clutch assembly, or do they all have different shaft sizes?
Geof
|
 |
| Bookmarks |
|
|
Linear Mode
