Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 10-18-2002, 10:04 AM
Registered User
Join Date: Aug 2001
Location: Ohio
Posts: 183
96 C280 Front Lower Control Arm Torx size?

Hi Group,

Anyone know the torx size for the 2 bolts that are used in the lower control arm bushings for the 96 C280.

Martineau Gauda

96 C280 Mercedes
82 Rolls Royce Silver Spur
Reply With Quote
Old 10-18-2002, 07:07 PM
Junior Member
Join Date: Dec 2001
Location: Westchester Co. , New York
Posts: 27
You don't really need to use the Torx side to get the bolt loose or off. The bolt is a centering bolt from the manufacturer and has an oval center to fit in the oval section used for the correction bolts. It will hold itself when you turn the other side. All you basically need is a 22mm wrench to loosen the bolt.

I'm not sure what the Torx size is, but its probably 45 or 50.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 08:24 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page