No power to the Electro Hydraulic Actuator.

		PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help
No power to the Electro Hydraulic Actuator.

11-11-2002, 07:52 PM

Cap'n Carageous Cap'n Carageous is offline

Registered User

Join Date: Aug 2001

Location: secret

Posts: 3,044

No power to the Electro Hydraulic Actuator.

I hooked up the official MB test harness (thanks Paul) and found no power coming to the Electro Hydraulic Actuator. I am getting power to the Idle Speed Control intermittantly. Overload Protection Relay appears to be working because removing the fuse makes engine run rough(cold) and causes the Automatic Braking System light in the dash light up. Engine starts well cold or hot, but the gasoline swimming pool under the throttle butterfly is still there and raw gas blows out the tailpipe.

I hesitate to ask..... but anybody have any ideas?

Last edited by Cap'n Carageous; 11-12-2002 at 08:35 AM.

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

All times are GMT -4. The time now is 01:05 AM.