Hi all

I need to clean the vacuum lines goin to and from the "ignition" switch
on my 1982 300D. What is the best way to get to that valve: from below,
removing the cover or from above, by removing the instrument cluster?

Thanks in advance.

Nicolas

------------------
1982 300D - http://members.xoom.com/nicodore/

One good way to clean all of this system is to spray "brake clean " through the lines & the vacuum valve. W/key off disconnect brown & brown w/blue tracer vacuum lines(under hood) & spray brake clean through the lines. Should clean everything without disassembly.

After the brake clean I like to follow it with a light blow of air.

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM

Thanks a lot.

I'll blow the brake cleaner. I wasn't sure how the valve would take it.

Thanks again.

Nicolas