Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 11-12-2002, 10:50 AM
Posts: n/a
hard starting when cold

Has anyone actually found the problem with 1990 300TE.
Car will start but unable to give it ANY gas until it warms up a bit.
otherwise car runs fine. There is a stronger than "sulfur" smell than usual and there was also a fast idle that I had to stomp on the pedal which seems to have disappeared.
Reply With Quote
Old 11-12-2002, 11:00 AM
it leaks, its german
Join Date: Mar 2002
Location: raleigh nc
Posts: 1,111
Check for vacum leaks (cis is especially sensitive cold to leaks) Check the duty cycle when hot if you find none, if thats in spec, start looking at the coolant temp sensor and the EHA amperage draw cold.

Project Smoker, '87 603 powered wagon
Hauler, 96 CTD can you say torque?
Toy 73 Cougar xr7 convertible
Acme Automotive Inc.
Raleigh NC
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 04:37 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page