|
|
|
#1
|
|||
|
|||
How would you adjust/tighten the wiper arms on the headlamp wipers. Here is my problem :
1. One of the arms is loose (that is you can rotate it by hand rather easily - the other side is firm) 2. The other arm (the firm one) does not sit level (it stops a little short of horizontal) Other than that, the wipers work. Thanks Patrick 94 S420 93 500SL |
#2
|
|||
|
|||
There is a "cap" on begining of the wiper arm. Pull it up and behind there is a screw or a nut (dunno for W140)...
------------------ ------------------------------------- WEB Site : http://www.adamou.dpn.ch A.S.C. 1999 ------------------------------------- |
#3
|
|||
|
|||
It's 10mm nut for 140.
------------------ MB STARS Master Guild Technician,12 years MB tech 5 years independent shop owner |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
88 W124 Single Wiper Arm | Lim | Tech Help | 14 | 10-03-2006 01:19 PM |
Color help? Wiper arm ... | BodhiBenz1987 | Diesel Discussion | 2 | 12-24-2004 10:23 PM |
W124 wiper arm cover - Need part number | AlexTheSeal | Tech Help | 6 | 09-01-2004 10:20 PM |
W140 95 S420 extending wiper revisited | sixto | Tech Help | 1 | 10-06-2003 12:50 AM |