I have searched the archives extensively and can't seem to find what type of bulb lights-up my shifter gate. Do any of you know what type and wattage this bulb is? Thanks. I am taking her apart later to install my shift adapter and new shift know and would like to have the needed parts at the time of removal.

Thanks again,

__________________
Brandon



2008 S550
1957 Dodge D100
1967 VW Microbus 21 Window
2001 Suburban
2004 Beach cruiser bicycle
-----------------GO DUKE!-----------------

"It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776

Its a small wattage special bulb from the dealer. I did mine recently and it is essential that you put the correct one in or it'll cause problems...it is not the same bulb that's in the vents though it does look the same...according to my guy in the know. I'm sorry I don't have the part number in front of me but your dealer or Partshop here will have it...like a buck or two. CANNOT be substituted with an AutoZone type bulb....but cheap enough from the OEM parts peoples.

__________________
Jim

1992 500E
2007 CLK63
2003 Audi RS6
2001 Audi allroad

Hi,

In the past few months I've ordered two bulbs for the interior - one for the shift gate and one for a dash vent, both were filled by the dealer as 000-825-00-94 which is a frosted bulb, 0.4 W 12 V, list price $2.50.

__________________
Brian Toscano

I suggest you go with a non-frosted for the shift gate, because they're brighter and it needs to light up that whole row. The OE bulb for my shift gate was non-frosted -- but dash vents are frosted.

I bought my replacement at WalMart: GE# 74.

Happy Holidays

__________________
-Paul-
'01 E430, Sport 72,000 mi
'98 C280, 126,500 mi

I have two 1987 300D's and both have the frosted bulb, maybe the later cars were different and used a non-frosted bulb.

__________________
Brian Toscano

I have only partial lit shift gate so I;ve also been thinking about looking at this.

How do you go about to get to it? Thanks

__________________
95 E420 ( 76K) SOLD
85 380SE(125k)
95 SL500(72k)

Remove the ashtray metal insert.
Remove two screws that hold wood front.
Remove two screws in back that hold ashtray to center console.
Move off to the side.
Pull up carpet in center console, one screw at edge of wood trim in center, remove.
Remove wood trim.
Access light bulb at base of shifter.

__________________
Brian Toscano

Gary, actually with your 1995 I'm not sure what the different instructions are, your center console is not like the first 124's.

__________________
Brian Toscano

It may even be easier to do in the newer 124s...I just removed the 500Es storage bin (1 screw) and removed the wood consoule...the bulb I replaced was at top of shifter in a small plastic plug.

That's the part number I have too..I don't remember if the bulb was frosted but I know the vent one was. What is key is the low wattage.

Here's a funny one (I didn't think so at the time)...when I did this it was apparent that the PO had spilled a cup of coffee and it had seeped all over under the consoule. I happen to HATE coffee and cleaning it brought the smell out and I felt like gagging. Whoever cleaned it up did a good enough job on the outside but...no wonder one of the window switches was twitchy. Took me a few days to take apart and clean up. Fun is...

__________________
Jim

1992 500E
2007 CLK63
2003 Audi RS6
2001 Audi allroad

Well, I have all of my things together. Now I am just waiting for it to warm up a little before I go out and install the bulb along with my new shift knob and adapter. I guess I have spent enough at the local MB dealership because he just gave me the bulb. It's not frosted and is in fact a # 74. Thank you gentlemen

__________________
Brandon



2008 S550
1957 Dodge D100
1967 VW Microbus 21 Window
2001 Suburban
2004 Beach cruiser bicycle
-----------------GO DUKE!-----------------

"It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776

I have an alldata account for my 94 E420. It shows a Technical Service Bulletin titled "illimination of Shift Gate too dim". It states the cause being "incorrect bulb (0.4W) installed". It states the remedy as "install bulb with 1.2W (clear).

Just thought I'd mention this, as I need to replace mine.

__________________
Willy

'94 E420 White

Mods
-------
Berg Werks Keyless Entry
Buzzer replaced with Chime
Dash Light Upgrade
Burlwood/Leather shift knob
Alpine CDA-9815 Head Unit
2002/2003 16" C Class 7-Spoke Wheels
Updated "Chip" to fix Code 19 problem

i recently installed a 1.2 watt osram clear(non-frosted) bulb which i bought from the dealer.

mine is a 1993-190e-1.8-uk spec.

Got part number 2721 Sylvania/Osram OEM from Checker auto parts for my 1988 300E, seems to work just fine.

I bought the same bulb from the dealer. Well actually he gave it to me. Works great and is plenty bright.

__________________
Brandon



2008 S550
1957 Dodge D100
1967 VW Microbus 21 Window
2001 Suburban
2004 Beach cruiser bicycle
-----------------GO DUKE!-----------------

"It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776

I bet an led t5 wedge bulb would be great for this

__________________
97 e300d, 78 300Dt, 95 E300d, 94 E320 estate