Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Closed Thread
LinkBack Thread Tools Display Modes
Old 09-04-1999, 01:20 PM
Posts: n/a
Same engine/tranny config. as previous message about shift speeds (I-6, 4 spd. auto). Engine stalls-out if I hit the accelerator too hard from a stop. Accelerates OK if I tap the accelerator pedal a few times, then press the pedal normally. Worse when cold but present during all temp. ranges, and no diffs. when in Park or in gear. Choke clearance OK, accel. pump OK (unsure of nozzle angle), fuel/air mix OK. No hesitation at speed.

Old 09-04-1999, 05:52 PM
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
Sounds like float level/ accel pump problem. If the float level is too low then the accel pump can't deliver enough gas. The accel pump delivery can be adjusted as well as the the float level. Is the warm-up tube connected to the exhaust? How about the ignition system dwell?
Old 09-06-1999, 02:57 AM
Posts: n/a
I just replaced the accelerator pumps on my '71 250/8 and it cleared up a similar problem. Does the car idle smoothly while stopped and in gear?

Closed Thread


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
91 300e with ASR 944s2c Tech Help 11 03-22-2004 11:11 PM
parting out 1971 250c busfarmer Mercedes-Benz Used Parts For Sale & Wanted 1 08-29-2002 01:39 PM
Erractic idle (16V). Anyone replaced a throttle body due to wear? Tinker Tech Help 2 08-25-2002 09:01 AM
1971 mercedes 250s for sale busfarmer Mercedes-Benz Cars For Sale 2 07-26-2002 05:13 PM
throttle cable connection to throttle linkage jasondew Tech Help 2 07-15-2002 10:58 PM

All times are GMT -4. The time now is 11:59 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page