Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 12-12-2002, 12:15 PM
Posts: n/a
Electric clock calibration

On my 450SLC electric clock, mounted center-dash (between two ventilation outlets), there is a small speed calibration screw on the back, labeled + in one direction, - in the other. Moving this screw does not seem to speed up my slow-running clock, although I have been cautious, moving the screw only a fraction of a turn. Has anyone improved their clock's accuracy by adjusting this screw? If so, how far did you have to turn it? My clock is losing about 6 minutes/day. I assume that to speed up my clock I should be turning the screw in the + direction. Any advice from someone who has done this would be appreciated.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 06:21 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page