Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 12-12-2002, 08:03 PM
420benz's Avatar
Registered User
Join Date: Jul 2001
Posts: 961
Window regulator guestion 89 420 sel

There doesent seem to be a stop in the up direction either electrical or mechanical.If i keep my finger on the switch to long,the motor keeps pushing the window up.Well today after hearing a clicking noise i removed the door panel and found the last two teeth on the regulator had broken off.My question is when the motor is removed from the regulator and the switch activated,will the motor keep turning?If so then it should not matter how the motor is installed on the new regulator or should i reinstall the motor in the same teeth location on the new regulator?I hope this makes sence. It is a[ brose coburg ]regulator.
Reply With Quote
Old 12-12-2002, 10:47 PM
Senior Member
Join Date: Apr 2001
Location: Beech Island, S.C.
Posts: 468
Window regulator

It does't matter what position the regulator is in. Just mount the motor and reinstall the regulator.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 06:59 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page