Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 12-31-2002, 09:37 PM
pete galbiati
Posts: n/a
87 190E 2.3 idle problem

about a mth. ago we had a prob. with climate control etc. was advised to rep.lace several items. but car was hard to start . so voltage overload was changed too. while we had all the components out so we could gain access to the volt. over. ..when we were putting all back together we started to experience a very rough idle.we took everything back out and re instaled it got better but never seems to smooth out . We went through the complete vacume system around the intake .we changed all the large rubber hoses and found the idle speed air pump(valve) was frozen so we replaced it . the idle is still eradic. IThe engine will start and run as long as I hold the accelerator at about 1000 and above when it is released it dies. or if the trans is put into drive it shutters and stalls out. Help!
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 10:19 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page