Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Closed Thread
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-24-1999, 04:50 PM
JCE's Avatar
JCE JCE is offline
Down to the Wear Bars
 
Join Date: May 1999
Location: So Kalifornia
Posts: 2,189
When the drivers side power seat is adjusted for me (pretty much bottomed out, pretty far back) it tilts back about 3/4" during acceleration, and rocks forward during braking. It also seems to sit lower on the inboard side. The seat doesn't rock when adjusted for my wife (about middle height, middle of front back range), and seems to be level. Is this likely to be a mechanism problem, or a problem with the bolts holding the seat to the floor.

Also, is there an easy way to get more lateral support from the seats, or do they need to be replaced with something else?

Thanks for any suggestions.

------------------
JCE
87 300E 55,000 miles
Shadow Silver



  #2  
Old 09-24-1999, 05:45 PM
gunter
Guest
 
Posts: n/a
My 88 300e does the same thing.
  #3  
Old 09-24-1999, 09:35 PM
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
It probably has loose bolts that connect the seat back to the bottom. Or the main attachment bolts are loose.

------------------
Benzmac:
1987 16V
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM

  #4  
Old 09-25-1999, 12:33 AM
Robert W. Roe's Avatar
Registered User
 
Join Date: May 1999
Location: Lehigh Valley PA
Posts: 1,330
My bottom seat cushion has too much "sag" when I sit on it. I suspect broken springs. Is this a repair that can be done by a good tech or does the cost get prohibitive (i.e. should I just live with having to keep my seat bottom cushion inclined all the way "down" to keep the front in the right position?

Is this a good weekend project for a novice or are there special upholstering skills needed? In other words, I don't want to break (or tear) something that's just worn. Can individual springs in the seat cushions be replaced? All of my seats are like this to some degree. Thanks in advance,

------------------
Robert W. Roe
1984 300SD 165,745 miles


Closed Thread

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how heavy is power seat? ktlimq Off-Topic Discussion 2 02-04-2004 10:44 PM
power seat blowing fuse domchang Mercedes-Benz SL Discussion Forum 3 08-30-2003 07:51 PM
Audi Power Seat Question Help Benz84 Tech Help 4 06-04-2003 10:20 PM
Power Seat INOP....Wiring problem agood Tech Help 1 04-27-2003 10:27 PM
190E 2.3, 1987 Power seat problem sidhu Tech Help 0 01-03-2001 08:04 AM



All times are GMT -4. The time now is 11:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page