|
|
|
#1
|
|||
|
|||
When moving auto. trans. to reverse, it takes about 2-3 seconds for the gear to engage (both cold and hot). No problems with forward gears. Fluid level OK. Due for filter change.
|
#2
|
|||
|
|||
Unless it has gotten worse, mine does the same thing. I did have a problem with the first trans in the 250C the wouldn't shift.
Pulled pan, Valve body, every thing looking for a culprit. Nada. Bought a rebuilt one for 500.00. Still in there. On my 400E when I go from reverse to Drive it hesitates 1-1.5 secs. As far as the manual says, it is normal. Nature of the beast. |
#3
|
|||
|
|||
IF it hesitates too long, there is an adjustment on the reverse band on these old transmissions. Have a good tech take a look.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
83 240D tranny won't shift past 2nd gear. | dmorrison | Tech Help | 16 | 10-31-2018 08:14 PM |
tranny removal 84 300DT | almadroog_7 | Diesel Discussion | 3 | 08-29-2004 11:00 PM |
tranny slip/flare search no help. Experts? | yorktown5 | Tech Help | 7 | 07-18-2003 11:17 AM |
can a diesel tranny work on my gas 250c? | dosoakies | Vintage Mercedes Forum | 11 | 05-29-2003 11:44 PM |
´69 250C tranny failure | Janzu | Tech Help | 3 | 05-04-2000 02:21 AM |