|
|
|
|
|
#1
02-09-2003, 08:23 PM
|
||||
|
||||
|
Does anybody know...
the part number, or numbers, for the bushings at the upper control arm where the torsion bar passes through on a 126?
Am in the planning stages for replacing the upper arms, lower ball joints and guide rod mounts. The only part I can't seem to find in FastLane is the torsion bar bushing where it passes throught (bolts to) the upper control arm. Thanks.
__________________
Mike Tangas '73 280SEL 4.5 (9/72)- RIP  Only 8,173 units built from 5/71 thru 11/72 '02 CLK320 Cabriolet - wifey's mid-life crisis 2012 VW Jetta Sportwagon TDI...at least its a diesel Non illegitemae carborundum. 
|
| Bookmarks |
|
|
Threaded Mode
