Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 02-13-2003, 09:02 PM
P. S. Chana
Posts: n/a
CIS problem W107 350SL 1977 (UK Spec)

Dear All,

I have searched the forum problems with post start up, but can not find a similar problem.

When cranked the engine fires up immediatley, rev increase to about 1200 rpm and then after 5 seconds the revs drop to almost 200 rpm and engine sounds as tough it is about to stall. At this stage engine can be reved or driven without hesitation or mis-firing.

When hot engine drives and idles great, although I do have hot start problem.

New cold start injector resolved previous cold start problem. Thought above problem might be thermo time switch, but can new one be faulty. Warm up regulator is also new.

Have ordered fuel pressure guage to check control pressure and fuel pump pressure. Any ideas as to pressures.

Hot start problem should be cured with fuel accumulator which I have ordered, but can any one be kind enough to point out why post start should be problem? One thing I have noticed that if the vacumm hose from distributor is removed at contoured hose on air slide valve, rev's increase to level I would expect, but the air slide valve is new as well.

Has any one encountered faulty new components or is there another problem?

Parry Chana
Reply With Quote
Old 02-14-2003, 01:00 AM
Registered User
Join Date: Dec 2002
Location: monclova coahuila mexico
Posts: 23
C.I.S: ?

the fuel distributor contains a diferential pressure valve.located inside a hex nut (remove the air filter case) this valve is inexpensive and operates whit the fuel warm up governor presure variations, the noozle or injectors needs hi presure to operate in hot engine normal temp.this valve gets calibration adding a washers (stainless steel) .
REcently change a valve it comes whit instruction and a lot of washers . be carefull whit the piston, spring , is very important each part.
sorry gramatics
hablo espaņol
mi name is Alberto
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 08:32 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page