|
|
|
|
|
#1
03-01-2003, 03:56 PM
|
|||
|
|||
w140 Rear Seat removal!!!! HELP!
I am changing out my HU in my 1992 300SD. I can't get the Rear seat UPPER cushion out. I have the lower cushion out, the 3 bolts holding the bottom of the upper cushion are out also. The 2 bolts under the first aid box are out alos. the cusion will hinge up, way up ( don't want to bend anyhting though) but it won't puch straight up or pull out. ANy ideas?
It is NOT a powered back seat. Thanks STEVE Report this post to a moderator | IP: Logged 03-01-2003 11:55 AM 
|
|
#2
03-01-2003, 03:57 PM
|
|||
|
|||
|
the saga continues
While i am waiting for a reply on the back seat I thought I would get the HU out and the interior covers off under the dash to run the wires!! NOT!!! I can't get the under dahs cover off of the drivers side>>> or would you recommend the passenger's side?
there is no FActory manual/CDROM fo rteh 140 chassis. I had one for the 126 chassis and it help alot with interior bits. I just dont want to pull to hard in the worng direction to undo these clips. Steve Report this post to a moderator | IP: Logged 03-01-2003 12:33 PM
|
|
#3
03-01-2003, 06:54 PM
|
|||
|
|||
|
the saga continues
While i am waiting for a reply on the back seat I thought I would get the HU out and the interior covers off under the dash to run the wires!! NOT!!! I can't get the under dahs cover off of the drivers side>>> or would you recommend the passenger's side?
there is no FActory manual/CDROM fo rteh 140 chassis. I had one for the 126 chassis and it help alot with interior bits. I just dont want to pull to hard in the worng direction to undo these clips. Steve Report this post to a moderator | IP: Logged 03-01-2003 12:33 PM
|
 |
| Bookmarks |
|
|
Linear Mode
