Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 03-06-2003, 07:28 PM
Registered User
Join Date: Oct 2000
Location: Jacksonvill, FL, USA
Posts: 125
Removal of window regulator


I did an search and got a lot of hits, but none answered my question.

This is for a 1980 300SD front passenger door.

The window regulator is broken. I have the regulator disconnected, but I cannot get it out because the window channel is blocking the motor. I even looked in the shop manual and it said to drill 3 20mm holes in the door to get to the bolts to disconnect the electric motor from the regulator, do I really need to drill the holes to get the regulator out.

This is a separate problem with the same car, but on the passenger rear door lock. The vacuum system to the interrior is disabled (because of so many leaks) When you push the lock down to lock the door it opens by itself, I disconnected the line from the actuator so it locks, but what is going on? I would like to make the vacuum system operational again. There does not seem to be an vacuum in the lines.



Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 05:09 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page