Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 03-14-2003, 05:25 PM
Posts: n/a
Question 1991 190e ignition help

I need to find out how to test if the ign module is recieving a td signal. I only have a haynes book for a 1988 190e, so hthe wiring is different. I have a td signal at the diagnostic plug of about 8 volts, but nothing at the fuel pump relay. I need to isolate if the problem is the ign mod or if I have a broken wire. I was also surprised to see the car run with the fuel pump relay jumped and the ign mod unplugged. I assume it was running on a pulse signal from the crank sensor. Where does the ign mod get the td from and if possible what color is the wiring in the ign mod connector. Thanks in advance for any help.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 02:30 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page