Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 03-15-2003, 07:18 PM
Coming back from burnout
Join Date: Jun 1999
Location: in the Pacific Northwest
Posts: 2,274
Can a siezed brake caliper be rebuilt? 83 240D

I pulled my 83 240D Bendix Brake Caliper today. The outside piston is stuck in place and I couldn’t pump it out when I removed the pads and applied brake pressure,.
I have two questions:
1. Can this Caliper be rebuilt?
2. Could I interchange two 82 240D ATI calipers I found at a junkyard and are rebuildable?
Reply With Quote
Old 03-15-2003, 07:26 PM
Registered User
Join Date: Jul 2001
Location: SoCal
Posts: 1,303
Try tapping the stuck piston with a brass tool to free it. If you can't remove it, the issue is moot. You may find the surfaces are pitted with rust. You can buff them with emery cloth, but if the piston is chrome plated and the surfacing has deteriorated, it must be replaced.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 03:11 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page