|
|
|
#1
|
|||
|
|||
Hi techs,
Quick question regarding 1993 190 2.6: I'm 6'2" tall and fit behind the wheel fine, but notice that the top rim of the wheel blocks my view of the top of the tach. The wheel angle is OK and I have an adequate inch of headroom, but think that an additional inch-or-so of room would be perfect (and would permit a straight-on view of the gauges). Is there any way to lower the seats (uh - yes, I've dropped them using the *power* adjustments as far as they will go)? Was an aftermarket kit widely available that boosted seat height (and could be installed unbeknownst to me) - and how would I spot it? Or am I destined to feel bigger-than-life. It's interesting to me as I've ownned a few MBZs and I've always adjusted the seats UP a little... Gulliver. |
#2
|
|||
|
|||
Big man, Little car. I think you're stuck with it. I know of no such kits.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
#3
|
||||
|
||||
You could go with an aftermarket seat that isnt as "thick" as the standard mercedes seat, then you could position it however you would like, if it really bugs you. Perhaps a manual seat out of a 190(euro most likely) would allow lower adjustment or a differnt steering wheel would allow you to see the gauges better. Just some thoughts...
------------------ Bart 1987 300SDL-T 1985 190E 2.3-16 1984 280GE Cabrio 1978 240D 1957 220S(running one day, I hope!) |
#4
|
|||
|
|||
Thanks - I thought that might be the case. No wonder so many women bought these things...
|
#5
|
|||
|
|||
My father was complaining about the same seat problem to a veteran salesman in a dealership, and he reached in to the car and found some kind of lever or something under the seat and it dropped another inch or two. I have always wondered what it was but no other sale staff have been able to figure out what it was, although there may yet be something. Just think of all the basketball players out there driving these cars. Another option that is available to you is to replace the steering wheel for a larger one. You didn't mention whether you had a sportline or not, but I think they had a slightly smaller steering wheel for quicker steering input, but that would reduce your view of the gagues. I think a larger steering wheel might be cheaper than swapping out the seat. Good luck,
Eric |
#6
|
|||
|
|||
Shortly after buying my car I had the driver's pad replaced. The seats are made of so called horse's hair - a spun plastic product that's pretty stiff and fairly thick. Perhaps you could have an upholstery shop (one that specializes in Benz' is strongly recommended) remove the bottom inch or so of the seat pad. The Benz seat pads are so stiff you'd probably never miss it. And if it doesn't work it's only about $130 for a new seat pad.
Cheers …tracy |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEED: 111 front seat close up pic | pkzip | Vintage Mercedes Forum | 3 | 10-10-2003 10:12 AM |
Front seat back | patm300E | Tech Help | 3 | 04-02-2003 11:58 PM |
400e Front passenger seat | mattd | Tech Help | 4 | 03-11-2003 02:51 PM |
124 Front Seat Rebuilding | HGV | Diesel Discussion | 3 | 11-25-2002 10:38 PM |
w124 front seat pads | JCE | Tech Help | 6 | 08-15-2000 12:37 AM |